U-boot
From RFID Guardian
u-boot for the RFID Guardian
Please read our ramblings on repository usage first!
Specialist who want to modify the bootloader that comes pre-installed in the RFID Guardian can do a checkout of our u-boot repository. This is a mirror with extensions of the BlackFin u-boot] code. Please browse along that site for lots of information on BlackFin, u-boot and uClinux.
| $ svn checkout https://svn.rfidguardian.org/u-boot/trunk u-boot |
Besides a bfin-elf toolchain, you will need a bfin-uclinux toolchain and a bfin-uclibc distribution. For a matching set, see our downloads page. Install bfin-uclinux and bfin-uclibc in the same place as bfin-elf. Add the bfin-uclinux toolchain bin directory to your path:
| $ export PATH=$PATH:/home/<ME>/projects/opt/uClinux/bfin-uclinux/bin |
if you installed the toolchains under /home/<ME>/projects.
Configure:
| $ make bf547-radiotuna_config |
Build:
| $ make |
